Hydraulic paper cutting machine is an essential paper cutting tool in our daily life. So, how do we sharpen, unload, and install paper cutters in the daily use of hydraulic paper cutters?

If we use a hydraulic paper cutter to cut paper, but find burrs or inability to cut through on the cut paper, we need to sharpen the knife. The detailed operation steps are to first half off the knife, remove all screws used to load the knife when closing, then take out the handle and rotate it upwards, remove all screws, and then take the knife to a professional sharpener for sharpening.

Half of the sharpened knife is narrower than the original knife, so there is a need to reduce the knife. Firstly, take an A4 sheet of paper and place it under the knife. When the cutter drops to a low point, please cut off the power and loosen the upper cutter screw. There are three adjustment screws on the upper part of the tool holder. Use a hexagonal socket to press down until the paper under the knife is cut off.

Hydraulic paper cutting machine

In order to ensure the cutting quality and insurance policy of the hydraulic paper cutting machine, we need to stop the following maintenance for the paper cutting machine:

1. Adhere to appropriate hydraulic pressure.

2. Use talcum powder or paraffin to cover the cutting platform and blade.

3. Add smooth oil.

4. Choose suitable hydraulic oil according to different seasons.