The operation of the programmable paper cutting machine is relatively simple, and the requirements for the environment are not high. Generally, power supply is ensured in the general affairs room. A typical paper cutter has an automatic switching system, which automatically rotates and cuts paper as long as it is fed into old paper. There is also a paper cutter that needs to press the start button to rotate and continue cutting. After the paper cutter is completed, the stop/reverse key should be pressed to stop the rotation of the paper cutter.

Programmed paper cutting machine is a traditional product used to handle the cutting needs of late printing. It has evolved from mechanical paper cutting machines to paper tape controlled paper cutting machines, and has also developed into microcomputer program control, color display, full image operation guide visualization processing, and computer-aided cutting external programming editing production data cutting systems, resulting in short production preparation time, high cutting accuracy, low labor intensity, and safer operation.

Paper cutting machine

For early products, if there is a paper jam fault, please press the back button or shutdown button, so that the damaged product can continue to be used. Most paper cutting machines are equipped with overload and power outage protection devices, which automatically stop when the motor is overloaded and heated. At this point, the cooling motor should be stopped for 20-30 minutes. At the same time, when you use it again, you should consider reducing the amount of input paper appropriately. The more advanced paper cutting machine will automatically stop and retrieve paper once overloaded, making it more convenient to use. When the paper cutting box is full, some machines will also automatically make a sound, reminding people to remove the paper scraps in a timely manner.

Before tearing the paper, you should check whether there are any hard objects, such as thumbtacks, stapler, etc., which are documents to be broken. If that's the case, it should be removed and put into the paper mouth, otherwise it may damage the tool. When using a paper cutter, it is important to avoid having too much paper, especially high-quality paper, and pay more attention to the use of paper. When placing paper, try not to bend the paper and place narrower paper in the center of the paper inlet.