Operating specifications for paper cutting machines

With the continuous progress of technology, the production demand of the printing industry, and the increasingly fierce market for paper cutting machines, the future development of paper cutting machines will move towards larger formats and higher intelligence. The editor of this article mainly organizes the operating specifications that need to be paid attention to during the use of paper cutting machines:

1. Operators must be familiar with the performance and key points of the paper cutting machine, and pass the exam before operating the paper cutting machine. Before starting each machine, first check whether the photoelectric protection switch of the paper cutting machine is normal and reliable. First, test the empty knife three times and observe if there is any knife return. If it is found to be abnormal, it is strictly prohibited to switch on and off. Personnel must repair it before using it.

2. Before starting the machine, fill all lubrication points with labeled lubricating oil. Pay attention to the surrounding environment and see if anyone is performing other maintenance work on the machine. Check the machine operation, centralized lubrication system, emergency stop buttons for all parts, and whether the device is functioning properly. It is strictly prohibited to place tools and other objects (such as steel rulers, wrenches, screwdrivers) on the top of the paper cutting machine.

3. When installing or disassembling the paper cutting blade, manual operation should be used. The switch can only be turned to the switch position after the main motor is completely stopped. It is strictly prohibited to touch and change the blade. When adjusting the depth of the adhesive strip on the paper cutter, the paper cutter should be raised first, and then the depth of the adhesive strip should be carefully adjusted from shallow to deep. After the blade edge is blunt, the blade should be replaced immediately and cannot be used again to avoid excessive machine load and damage to the components. It is prohibited to extend your arm into the knife door after turning on the power of the paper cutting machine. If a malfunction occurs, the machine should be stopped immediately. The paper cutting knife is not fully retracted and cannot be reached for paper.

The above is the suggestion for the current paper cutting machine. If you want to learn more about paper cutting machine knowledge, you can continue to follow - Rui'an Dapeng Printing Machinery Co., Ltd.