The operation of hydraulic paper cutting machines is relatively simple and has low environmental requirements. Usually, a power supply is used in a regular office to ensure its normal operation. Usually, paper cutting machines have an automatic switching system. As long as old paper is lost during the input process, the hydraulic paper cutter will automatically rotate to shred the paper. Some paper cutters require pressing the start button once, and the paper cutter will rotate to continue cutting. After shredding, press the stop/reverse key to stop the cutter rotation.

Before shredding the paper, please check if there are any hard objects on the document to be shredded, such as paper clips and staples. If present, it should be removed and placed in the paper inlet, otherwise the cutting blade may be damaged. When using a hydraulic paper cutter, please be careful not to get too much paper stuck at once, especially high-quality paper, and be careful when using it to avoid getting stuck. When loading paper, please try not to tilt it. The paper should be placed in the center of the paper inlet.

For early products, if paper jams occur during use, please press the fast rewind or stop keys to continue crushing. Most paper cutting machines are equipped with overload and power outage protection devices. When the motor is overloaded and heated, it will automatically stop. At this point, the use of the motor should be stopped for 20-30 minutes to cool down. At the same time, when reusing, consideration should be given to appropriately reducing the paper feed. The more advanced paper cutter will automatically stop and eject when the paper is overloaded, making it more convenient to use. When the box of the paper cutter is full, some machines will automatically make a sound, reminding people to clean the paper scraps in a timely manner.