The paper cutting machine, also known as a cutting knife, is relatively simple to operate and does not have high environmental requirements. Generally, power is used in the office to ensure that the power supply can be carried out. The ordinary paper cutter has an automatic switching system, and as long as old paper is input, the paper cutter will automatically rotate and cut the paper. There are also paper cutters that need to press the start button to rotate and continue cutting. After the paper cutting machine is completed, press the stop/reverse key to prevent the machine from rotating.

He said: "Before cutting paper, you should first check whether there are any hard objects, such as thumbtacks, stapler, etc., which are all documents to be broken." If so, it should be removed and put into the mouth of the paper, otherwise it may damage the tools. When using a paper cutter, it is important to avoid having too much paper, especially high-quality paper, and pay more attention to the use of paper. Try not to bend the paper and place narrower paper in the center of the paper inlet.

Cutting knife

For early products, if there is a paper jam fault, please press the back button or shutdown button, so that the damaged product can continue to be used. Most paper cutting machines are equipped with overload and power outage protection devices, which automatically stop when the motor is overloaded and heated. At this point, the cooling motor should be stopped for 20-30 minutes. At the same time, when you use it again, you should consider reducing the amount of input paper appropriately. The more advanced paper cutting machine will automatically stop and retrieve paper once overloaded, making it more convenient to use. When the paper cutting box is full, some machines will also automatically make a sound, reminding people to remove the paper scraps in a timely manner.

The paper cutting machine consists of domestic paper cutting machines and industrial paper cutting machines. There are many kinds of Paper Cuttings machines with different degrees of automation.