The operation of the paper cutting machine is relatively simple, and the requirements for the environment are not high. Usually, in general offices, a power supply can be used to ensure power supply. Usually, the paper cutter has an automatic switching system. As soon as the paper is fed, the paper cutter will automatically rotate and shred the paper. For some paper cutters, you need to press the start button once and the paper cutter will rotate to continue cutting. After shredding, press the stop/reverse key to stop the paper cutter.

Before shredding the paper, please check if there are any hard objects on the document to be shredded, such as paper clips and staples. If present, it should be removed and placed in the paper inlet, otherwise the cutting blade may be damaged. When using the paper cutter, please be careful not to get too much paper stuck, especially high-quality paper, and be careful when using it to avoid getting stuck. Please try not to tilt the paper when inserting it. Please try placing the paper in the center of the paper inlet.

For early products, if there is a paper jam during use, the reverse button or stop button should be pressed to continue using the shredder. Most paper cutting machines are equipped with overload and power outage protection devices. When the motor is overloaded and heated, it will automatically stop. At this point, please stop using for 20-30 minutes to cool the motor. Meanwhile, when reusing, please consider reducing the amount of input paper appropriately. A more advanced paper cutter will automatically stop and eject paper when it is overloaded, making it more convenient to use. When the box of the paper cutter is full, some machines will automatically make a sound to remind people to clean up the shredded paper in a timely manner.