Malfunctions and troubleshooting methods of paper cutting machine not pressing paper

Firstly, check if debris or books are blocking the infrared wall on the desktop. If so, please remove it and check if the upper and lower limit sensors of the paper press are not aligned. If the position is incorrect, please adjust the sensor. If everything is normal, it is necessary to check the paper roller motor, paper roller, and code disk sensor. If there are any issues that require replacement of components, please contact the dealer to arrange for technical personnel to visit.

The operation of the paper cutting machine is relatively simple and has low environmental requirements. Usually in a regular office, it is possible to ensure the normal operation of the power supply. Usually, paper cutting machines have an automatic switching system. As long as the paper is fed, the paper cutter will automatically rotate to shred the paper. For some paper cutters, you need to press the start button once and the paper cutter will rotate to continue cutting. After shredding, press the stop/reverse key to stop the paper cutter.

Before shredding the paper, please check if there are any hard objects on the document to be shredded, such as paper clips and staples. If present, it should be removed and placed in the paper inlet, otherwise the cutting blade may be damaged. When using a paper cutter, please be careful not to load too much paper at once, especially high-quality paper, and be careful when using it to avoid paper jamming. Please try not to tilt the paper when inserting it. Please try placing the paper in the center of the paper inlet.

For early products, if there is a paper jam during use, press the reverse key or stop key to continue using the shredder. Most paper cutting machines are equipped with overload and power outage protection devices. When the motor is overloaded and heated, it will automatically stop. At this point, please stop using for 20-30 minutes to cool the motor. Meanwhile, when reusing, please consider reducing the amount of input paper appropriately. A more advanced paper cutter will automatically stop and eject paper when it is overloaded, making it more convenient to use. When the box of the paper cutter is full, some machines will automatically make a sound to remind people to break the paper in a timely manner.